Samsung HG46NA590LB Installation Manual

Quick Setup Guide
To register this product please visit
STOP
www.samsung.com/register.
Please do not return
If you are having problems operating this TV,
US : 1-866-894-0524
BN68-04353A-01
CANADA : 1-800-726-7864
For web support please visit
http://www.samsung.com/us/business
List of Parts
1 2 3 4
5 6
Remote Control (AA59-00628A) & Power Cord
1 2
Batteries (AAA x 2)
Data Cable Hotel Mount Kit
3 4
(BN39-00865B, BN39-01011C)
• Owner's Instructions Security Screw x 4
5 6
• Safety Guide 5/32" tamper resistant hex wrench
(sold separately)
Installing the batteries (Battery size: AAA)
After you have installed the batteries, use a screwdriver to screw in the screw that
holds the battery cover closed.
Connecting the TV with an SBB or STB
[TV Rear Panel]
ETH MODEM
Data Cable
1. Connect the [DATA] jack of the TV to the [ETH MODEM] jack of the STB (SBB)
with the Data cable.
➣ Use data communication.
List of Vendors and Compatible Data Cables Supplied with the TV
♦ Refer to the code label on the data cables.
Note the
Confi rm the code on
the Code Label labeled end.
Note the
labeled end.
Vendor Cable code
OCC BN39-00865B
NXTV BN39-01011B
nStreams BN39-01110A
MTI BN39-01011C
[Hotel-QSG-NA]BN68-04353A-01ENG.indd 1
Installing the LED TV Stand
♦ HG40NA590 / HG46NA590 / HG40NA790 / HG46NA790 / HG55NA790
Components
When installing the stand, use the provided components and parts.
this unit
B
A 1 EA
Please call; 1 EA
 Stand
 Guide Stand
(depending on the model)
1
2
x4
C
(M4 X L12) Top View
B
Front
✎
A
ATTENTION
✎
Rear
DO NOT USE DO NOT USE DO NOT USE
CHEMICALS GREASE OIL
(Correct assembly)
3 3
Side View
4
Hotel Plug & Play
The Hotel Plug & Play function automatically performs the Hotel mode selection, Country Setup, Clock Setup, and
Picture mode Setup once, when power is fi rst turned ON. Setup also runs automatically after you have executed a Service Reset.
♦ UI Scenario
Setup > Plug & Play
Factory Reset
Type 32P6AF0D
Easy Set up
Local Set US
Basic Model HA477
• Interactive
SVC Model
477
• Standalone Plug & Play
Tuner SI_ATC2
Light Effect OFF
• Standalone Only
Ch Table NONE
Front Color NONE
If you select Standalone
Plug & Play
If you select Factory Reset,
the TV resets all values to
Setup > Menu Language
their factory defaults and
Select the language you want to use Select English
as the language
then displays the Hotel
Plug & Play menu. Go to
• English
Next
the fi rst Hotel Plug & Play
• Español
screen above right labeled
• Français
Setup>Plug & Play.
NOT connected Connected WIRED
WIRED Network Network
Setup > Network Settings (1/5) Setup > Network Settings (1/5)
The next step is to set up a wireless network using an Network cable connected.
internal LAN Adapter. Press Next to configure your wired network settings.
Previous
Next
Skip
If you want to connect to your wireless network, unplug
If you want to connect to your wired network, plug in a
the network cable.
network cable.
E
Setup > Network Settings (2/5)
Select your wireless router from the list.
Refresh
TEW-672GR_C4AEB0
E
HP WPS(PBC)
ureadymobile
Previous
ureadyintranet
Next
setup
Skip
NINARICCI
E
Setup > Network Settings (4/5) Setup > Network Settings (5/5)
Wiress network and Internet connection failed.
Enter security key.
*********0 11 entered
WPS(PBC) MAC Address 00:40:30:31:78:01
IP Address
1 2 3 4 5 6 7 8 9 0 Del All
Subnet Mask
Previous
q w e r t y u i o p * ^ SEC_LinkShare Gareway
Next E DNS Server
a s d f g h j k l ~ ? !
IP auto setting failed. Try the follwing to set your IP address automatically. Or set
z x c v b n m . , @
Skip your IP address manually by selecting 'IP Settings'.
Caps Shift 1 Space -Ensure DHCP server is enabled on router and unplug and re-plug in the router.
-Contact your Internet Service Provider for more information.
♦ Hotel Mount Kit
Long Bolt (2EA) Short Bolt (2EA)
C
Top
x8 (M4 X L12)
D
x4 (M4 X L12, SECURITY)
Bottom
 Screws
✎
Make sure to distinguish between the front and back of the stand and the
Stand Guide when assembling them.
✎
Make sure that at least two people lift and move the LED TV.
✎
Lay the product down, with the screen facing down, and then fasten the screws to the stand.
♦
Assembling the swivel
The 32" and larger LED TVs have swivel stands. You can set these stands so
Place a soft cloth over the table to
that the TVs swivel 20 degrees left and right. 60 degrees left and right, or 90
protect the TV, and then place the TV
degrees left and right.
on the cloth screen side down.
Insert the Stand Guide into the slot on
60"
the bottom of the TV.
(Incorrect assembly)
x4
C
(M4 X L12)
x4
D
(M4 X L12, SECURITY) Leaving the BRACKET HOLDER SWIVEL
unchanged lets the TV swivel 20° left and
right. To let the TV swivel 60° left and right,
rotate the BRACKET HOLDER SWIVEL
180°, and then assemble the stand as
shown above.
If you select
Standalone Only
Standalone mode is set.
If you select
Next Interactive Interactive
Hospitality Option Menu
Setup > Auto Program (1/5) Setup > Auto Program (2/5)
Let's fi nd and store channels My set-top
Set the search options for auto tuning.
on your TV. Do you need to box provides
search for channels? all the If you
Previous
channels that Air
E • Yes, I need to. select
are available, Cable
Next
"Yes,
so I don't
• No, I don't need to.
I need
need to searh Skip
for channels. to"
If you select "No, I
don´t need to."
Setup > Clock (2/3)
Setup > Clock (3/3)
What time zone are you in?
Add Daylight Savings Time? Switch are DST
function off.
• Newfoundland
• Off
Previous
• Atlantic
• On Next
E • Eastern
Skip
Previous • Central
Next • Mountain
Skip
E
Setup > Clock (1/3)
Setup > Picture Mode
Set the Clock Mode.
Select Picture Mode.
• Auto
• Dynamic
Previous
• Manual
• Standard
Next
IP Settings
Standalone Hotel Option
IP Mode Auto
Menu
IP Address 0 . 0 . 0 . 0
169.254.243.193 Previous
255.255.0.0 Subnet Mask 0 . 0 . 0 . 0
0.0.0.0 IP Settings
Gateway 0 . 0 . 0 . 0
0.0.0.0 E
Retry DNS Mode Auto
DNS Server 0 . 0 . 0 . 0
Next
OK
R Return
Viewing the Connection Panel
Bolt + Nut
Nut (2EA) Washer (2EA)
1
2
3
To affi x the stand to a fl at surface
such as a dresser top, desk top, or
4
entertainment center, use the Hotel
5
Mount Kit as shown.
➣
The product color and shape may vary depending on the model.
1 USB (5V 0.5A) / CLONING, (HDD 5V 1A) / CLONING
2 LAN
3 COMPONENT IN / AV IN
4 AUDIO OUT
5 PC IN
6 DIGITAL AUDIO OUT (OPTICAL)
90"
7 ANT IN
8 VOL-CTRL
9 EX-LINK
0 PC / DVI AUDIO IN
! DATA
@ HDMI IN 1 (DVI), 2 (ARC), 3
# VARIABLE AUDIO OUT
To let the TV swivel 90° left and right,
Notice
remove the BRACKET HOLDER SWIVEL When in the Hotel mode (Interactive or Standalone), the Channel menu items in
and assemble the stand as shown above
the Menu OSD, except for Channel List, are deactivated. If you need to change the
without the BRACKET HOLDER SWIVEL.
channel line up, use the Channel Setup item in the Hotel option menu.
Hotel Plug & Play is not supported in B-LAN models (D478/578).
♦ Hotel Plug & Play OSD
- Initial Highlight: Interactive
After 3
- If you select the Standalone Only button, the Standalone hotel mode is set
seconds
by default and the "Standalone mode is set" OSD appears for 3 seconds.
TV will enter the RF mode.
- TV enters into RF mode automatically after displaying "Standalone mode is
set" OSD for 3 seconds.
- If you select the Interactive mode, the Interactive Setup Menu is displayed.
Press Power OFF
Press the power off key to exit from the Interactive menu.
to exit.
- If you select the Standalone Plug & Play mode, the "Select Menu
Language" OSD appears.
Setup > Auto Program (3/5)
♦ Select Menu Language OSD
Set the parameters for cable auto - If you select Standalone from the "Select Hotel TV Mode" OSD, the "Select
program.
Menu Language" OSD appears.
Select the digital
• Digital Cable System STD
Previous Previous
c cable system
- Initial Highlight : English
Next • Analog Cable System STD Next
- Display time: OSD timeout and operation are the same as Samsung's
E
Skip Skip
consumer TV models.
- If you press the Enter key, the "Select Country" OSD appears.
♦ Clock Mode OSD
E
- Initial Highlight: Auto.
Setup > Auto Program (4/5)
- Display time: 30 seconds.
Auto Program is fi nding channels
- The Clock Set item OSD appears if you select Manual.
for you ...
Cable 64
Previous - If you press the Enter key after setting the clock, or while in Auto clock set,
Select Eastern if
you are located in Next DTV Air 0 Stop
the Picture Mode OSD appears.
Air 0
that region.
Skip
DTV Cable 0
♦ Set daylight saving time OSD
Cable 0
- Initial Highlight: Off
- If you press the Enter key, the Select the DST area OSD appears.
E
E
♦ Picture Mode OSD
Setup > Auto Program (5/5)
- Initial Highlight: Dynamic.
Set the
Auto Program is complete
- The TV displays the Picture Mode OSD where you can choose the
current time
110 channels are memorized.
automatically
Dynamic or a Standard Picture mode.
using the time
Previous
DTV Air 40
from the digital
- After you select the picture mode, the TV displays the Standalone Setup
Air 30
broadcast. Next OK
E DTV Cable 20
Menu OSD. Press power off to exit.
Skip Cable 10
♦ Auto Search Mode OSD
- If you select the Skip option, the TV displays the Clock Mode OSD.
- If you press the Enter key, the TV auto searches for channels.
- The OSD Display time, which starts at the time that Auto Store is
Press Power OFF
completed goes to the time Auto Sort starts, is 30 seconds.
to exit.
# @
!
0
9
8
- SIDE -
@
1
6 7
2012-04-04 오전 10:54:33