Samsung HG32EA790 Quick Manual

Quick Setup Guide
To register this product please visit
www.samsung.com/register.
BN68-04282F-02
List of Parts
The provided accessories may vary depending on the model.
➣
1 2 3
4 5 6
Remote Control (AA59-00629A) & Power Cord
1 2
Batteries (AAA x 2)
Data Cable (BN39-00864A) • Owner's Instructions
3 4
• Safety Guide
Holder-Ring Holder-Wire Stand
5 6
Connecting the TV with an SBB or STB
[TV Rear Panel]
ETH MODEM
Data Cable
1. Connect the [DATA] jack of the TV to the [ETH MODEM] jack of the STB (SBB)
with the Data cable.
➣ Use data communication.
List of Vendors and Compatible Data Cables Supplied with the TV
♦ Refer to the code label on the data cables.
[QSG-790-EU,XY]BN68-04282F-02ENG.indd 1
Installing the LED TV Stand
♦ HG32EA790 / HG40EA790 / HG46EA790 / HG55EA790 / HG55AA790
Components
When installing the stand, use the provided components and parts.
A 1 EA B 1 EA
C
x8 (M4 X L10)
 Stand
 Guide Stand  Screws
(depending on the model)
➣ The stand shape of product may vary depending on the model.
1
2
C x4
(M4 X L10)
Top View
B
Front
A
✎
ATTENTION
Place a soft cloth over the table to
protect the TV, and then place the TV
Rear
on the cloth screen side down.
✎
Insert the Stand Guide into the slot on
DO NOT USE DO NOT USE DO NOT USE
CHEMICALS GREASE OIL the bottom of the TV.
O O O O O O X X X X X
3 3
Side View
4
C x4
(M4 X L10)
Hotel Plug & Play
Hotel Plug & Play is a function that automatically performs the Hotel mode selection, Country Setup, Clock Setup and Picture mode Setup once.
– Hotel Plug & Play is available only one time when power is fi rst turned ON.
– After setting up fi rst TV and Clone TV to USB
– Next TV only needs to exit Hotel Plug & Play, connect USB, then Clone USB to TV.
– Depending on model and region, some menu may NOT exist.
♦ UI Scenario
Setup > Start
If Standalone Only is selected
Easy Set up After Plug & Play is
completed, TV will be set
to standalone mode.
● Interactive Standalone mode is
● Standalone Plug & Play set.
Next
● Standalone Only
Setup > Network Settings
(1/5)
If Standalone Plug
& Play is selected NOT connected
The next step is to set up a wireless network using an internal LAN
Adapter.
WIRED
Previous
Network
Setup > Menu Language
Next
Select the language you want to use. Select English as the
menu language.
Skip
● Hrvatski
If you want to connect to your wired network, plug in a network cable.
● Čeština
Next
● Dansk
● Nederlands
Setup > Network Settings (1/5)
● English
Network cable connected.
Connected
Press Next to confi gure your wired network settings.
WIRED
Previous
Network
Next
Skip
If you want to connect to your wireless network, unplug the net-
work cable.
Setup > Clock (1/2)
Set the Clock Mode. Set the current time
automatically using the
time from the digital
broadcast.
Previous
●
Auto
Next After Searching the
● Manual
Skip channels.
E
Setup > Picture Mode
Select Picture Mode.
Previous
● Dynamic
Next
● Standard
Viewing the Connection Panel
<HG**EA790*** Model>
% $ # @
- SIDE -
!
1
2
^
3 0
4
9
8
%
5
1
6 7 7
<ASIA Model - AA790>
% $ # @
- SIDE -
1 !
2
%
3
0
4
9
1
8
6 7
TV will enter the RF mode.
Setup > Network Settings (2/5) Setup > Network Settings (4/5)
Select your wireless router from the list. Enter security key.
Refresh
*********0 11 entered
E TEW-672GR_C4AEB0 E
WPS(PBC)
HP 1 2 3 4 5 6 7 8 9 0 Del All
ureadymobile
Previous q w e r t y u i o p *
ureadyintranet a s d f g h j k l ~ ?
Next
setup z x c v b n m . , @
Skip Caps Shift 1 Space
NINARICCI
E
Setup > Network Setting (5/5)
Wiress network and Internet connection failed.
E MAC Address 00:40:30:31:78:01
IP Address 169.254.243.193
Subnet Mask 255.255.0.0
Gareway 0.0.0.0
SEC_LinkShare
DNS Server 0.0.0.0
IP auto setting failed. Try the follwing to set your IP address automatically.
Or set your IP address manually by selecting 'IP Settings'.
-Ensure DHCP server is enabled on router and unplug and re-plug in the router.
-Contact your Internet Service Provider for more information.
E
IP Settings
Setup > Auto Tuning (2/5)
IP Mode
Set Auto Tuning search options.
IP Address 0 . 0 . 0 . 0
Digital & Analogue Digital Analogue Subnet Mask 0 . 0 . 0 . 0
E
Previous Gateway 0 . 0 . 0 . 0
Air ● ● ●
Cable ● ● ● DNS Mode
Next
Settlite ● DNS Server 0 . 0 . 0 . 0
Skip
OK
R Return
<Depending on Region,
E
E
this step may not exist.>
Setup > Auto Tuning (1/5) Setup > Country
Let's find and store channels on your Selecting Aerial cable Set the country to United
Select Country.
TV. How do you receive programming? means all the channels Kingdom.
available through your
RF cable will be stored. ● Serbia
E
Previous
(Auto Tuning
● Yes, I need to.
● Slovakia
necessary)
Next
● No, I don't need to. ● Slovenia
● Switzerland
Skip
●
United Kingdom
<Middle ASIA Model - AA790>
% $ # @
!
1
2
3 0
4
9
8
5
6 7
➣
The product color and shape may vary depending on the model.
1 USB (5V 0.5A), (HDD 5V 1A) / CLONING
2 PC / DVI AUDIO IN
3 LAN
4 RJP
5 EXT (RGB)
6 DIGITAL AUDIO OUT (OPTICAL)
7 ANT 1 IN, ANT 2 IN(SATELLITE)
8 COMPONENT IN / AV IN
9 VOL-CTRL
0 VARIABLE AUDIO OUT
! DATA
@ HP-ID
# HEADPHONE JACK
$ PC IN
% HDMI IN 1 (DVI), 2 (ARC), 3
^ COMMON INTERFACE
Notice
When in the Hotel mode (Interactive or Standalone), the Channel menu items in
the Menu OSD, except for Channel List, are deactivated. If you need to change
the channel line up, use the Channel Setup item in the Hotel option menu.
♦ Hotel Plug & Play OSD
- Initial Highlight: Interactive
- If you select the Standalone Only button, the Standalone hotel mode is set by default
and the "Standalone mode is set" OSD appears for 3 seconds.
- TV enters into RF mode automatically after displaying "Standalone mode is set" OSD for
3 seconds.
- If you select the Interactive mode, the Interactive Setup Menu is displayed. Press the
power off key to exit from the Interactive menu.
- If you select the Standalone Plug & Play mode, the "Select Menu Language" OSD
appears.
♦ Select Menu Language OSD
- If you select Standalone from the "Select Hotel TV Mode" OSD, the "Select Menu
Language" OSD appears.
- Initial Highlight : English
- Display time: OSD timeout and operation are the same as Samsung's consumer TV
models.
WPS(PBC)
- If you press the Enter key, the "Select Country" OSD appears.
^ Previous
! ♦ Clock Mode OSD
Next
- Initial Highlight: Auto.
Skip
- Display time: 30 seconds.
- The Clock Set item OSD appears if you select Manual.
- If you press the Enter key after setting the clock, or while in Auto clock set, the Picture
Previous
Mode OSD appears.
IP Settings
♦ Set daylight saving time OSD
Retry
- Initial Highlight: Off
Next
- If you press the Enter key, the Select the DST area OSD appears.
♦ Picture Mode OSD
- Initial Highlight: Standard
Auto - The TV displays the Picture Mode OSD where you can choose the Dynamic or a
Standard Picture mode.
- After you select the picture mode, the TV displays the Standalone Setup Menu OSD.
Auto
Press power off to exit.
♦ Auto Search Mode OSD
- If you select the Skip option, the TV displays the Clock Mode OSD.
- If you press the Enter key, the TV auto searches for channels.
- The OSD Display time, which starts at the time that Auto Store is completed goes to the
time Auto Sort starts, is 30 seconds.
Previous
Next
- SIDE -
%
1
2012-05-21 오후 4:07:50