Major Operating Controls And Their Functions - Panasonic WV-CP310 Installation Manual

Major operating controls and their functions

(Side view)
(Rear view)
<WV-CP300, WV-CP310>
1
1 AC power input terminal [120 V~ 60 Hz]
<Only for WV-CP300, WV-CP310>
Connect with the supplied power cord.
Video output connector [VIDEO OUT]
2
Provides video output to system units.
3 Tripod
mount base
This is used to install the camera onto the
mount bracket (Iocally procured).
ALC lens connector
4
Connects to ALC lens (4-pin).
Back focus adjustment screw
5
Adjusts the back focus distance and
image focal length.
Power input terminal [12 V IN, 24 V~IN]
6
<Only for WV-CP304, WV-CP314>
The power supply of 24 V AC or 12 V DC is
connected to this terminal.
7 Setup button [SET]
Press the [SET] button once and the
"FOCUS ADJUSTMENT" screen will be
displayed.
12
5
4
2
120V~60Hz VIDEO OUT
3
(Bottom view)
<WV-CP304, WV-CP314>
24V~IN 2-N
6
12V IN
3
Hold down the [SET] button for more than
2 seconds and the setup menu screen will
be displayed.
• [LEFT]/[RIGHT]: Press the [RIGHT] or [LEFT]
button to move to the right or left in the
menu, or change the displayed values.
• [UP]/[DOWN]: Press the [UP] or [DOWN]
button to move up or down in the menu.
(LEFT)
( T h e d i re c t i o n s o f " U P " , " D O W N " ,
"LEFT"and "RIGHT" are as shown when
you are directly facing "UP".)
• [SET]: Press this button in the menu to
confirm the selected value or function.
In addition, this button is used to open
submenus.
7
2
1-L
VIDEO OUT
(UP) UP
(RIGHT)
(DOWN) SET