Frame No; Playback Volume; Lcd Brightness; Lcd Power Save - FujiFilm FINEPIX S1 Series Basic Manual

FRAME NO.

New pictures are stored in
image files named using a
four-digit file number as-
signed by adding one to the
last file number used. The
file number is displayed dur-
ing playback as shown at right.
controls whether file numbering is reset to 0001
when a new memory card is inserted or the cur-
rent memory card is formatted.
• CONTINUOUS: Numbering continues from the last
file number used or the first available file num-
ber, whichever is higher. Choose this option to
reduce the number of pictures with duplicate
file names.
• RENEW: Numbering is reset to 0001 after format-
ting or when a new memory card is inserted.
• If the frame number reaches 999-9999, the shutter
release will be disabled (
• Selecting RESET (
CONTINUOUS but does not reset frame numbering.
• Frame numbers for pictures taken with other cam-
eras may differ.
106
Frame number
100-0001
Directory
number number
FRAME NO.
124).
101) resets FRAME NO. to

PLAYBACK VOLUME

Press the selector up or down to choose volume
for movie playback and press MENU/OK to select.

LCD BRIGHTNESS

File
Press the selector up or down to choose display
brightness and press MENU/OK to select.

LCD POWER SAVE

Choose whether to save power to increase bat-
tery life. This option does not take effect during
playback or recording movies.
Option
POWER SAVE ON
POWER SAVE OFF
The Setup Menu
Description
The display dims to save power if no
operations are performed for a few
seconds. Normal brightness can be re-
stored by pressing the shutter button
halfway.
Automatic dimming off.