Table of Contents
Advertisement
System Features
Factory Alarm Trigger Notification: This system has an optional input
that can be connected to the horn circuit. If the vehicle has a factory
alarm controlled by the lock/un lock keyless entry system, the remote
reports when the factory alarm is triggered - the remote screen dis-
plays the alarm icon and "alarm door open" displays the text area.
Status LED: The Control Center Status LED flashes as a visual indicator
that your vehicle's remote start system is locked.
Starter Kill: The Failsafe® Starter Kill relay prevents the engine from
starting.
Note
May require additional parts and installation
Emergency Override
The following procedure bypasses the optional Failsafe Starter Kill
when a programmed remote is not available.
Number of presses__________
Turn the ignition On.
1.
Press the control button on the Control Center the correct
2.
number of times (the default is 1 press).
3.
After a few seconds the Failsafe Starter Kill is bypassed and
you may start your vehicle with a key.
Note
As a precaution, if programmed for Passive Locking or Auto
Re-locking the system should be placed into Valet Mode
until a remote is available.
28
© 2011 Directed Electronics. All rights reserved.
Advertisement
Table of Contents
