Programming - Clifford 470.4X Owner's Manual

Programming

To enter; hold the
beep and turns the LED on, the programming main menu has been
accessed.
To save and exit, press and release the
main menu, and repeat to exit. 1 short and 1 long beep is emitted for
each step back, the LED turns off when programming is exited.
Remote Features menu
Press and release the
cate the remote features menu is accessed and can be set. Press
buttons indicated below, 1beep and flash turns the feature on, 2
beeps and flashes turns the feature off.
Autolock feature: Press
Remote Beeps: Press
Car 2 feature: Press
Remote Learning
Press the
is ready to program to the system.
Per the instruction in Remote Pair under the Main Menu section
of this guide, following step 4 of Prepare the vehicle system to
be Paired with a new remote. Press and hold the
horn (if connected) emits one long honk to confirm the remote has
been learned.
40
button for 8 seconds, the remote emits one long
button, 2 LED flashes and beeps indi-
button,3 LED flashes and beeps indicates the remote
button to go back to the
to turn on/off.
to turn on/off.
to turn on/off.
© 2011 Directed Electronics. All rights reserved.
button, the