Managing Push 2 Talk Settings - Sanyo SCP-3100 User Manual

SCP3100NZ060529qxd

Managing Push 2 Talk Settings

Assigning Speed Dialing for Push 2 Talk Entries
To assign Speed Dialing for Push 2 Talk entries:
1.
Select
2.
Select an unassigned number and press
When you select an assigned number and press
asked whether you want to overwrite the assigned number.
Select Yes or No, or you can also select Reset to cancel the
stored speed dial entry.
3. Press Go to (left softkey), select the list from which you want to
set a speed dial (Personal List or Personal Groups).
4.
Select the contact and press
– or –
Select the group and press
Set as to assign the selected group as a speed dial.
Details to display the group details. You can select the group
member from the group list.
To use Speed Dial for a Push 2 Talk entry:
From standby mode, press the appropriate speed dial key
(locations 2-9) and press
Restarting the Push 2 Talk Service
To restart the Push 2 Talk service:
Select
122
06.5.29 1:28 PM
> Contacts > Speed Dial #s.
, select an option, and press
> Settings > Push 2 Talk > Restart.
Page 122
.
.
.
12. Push 2 Talk
, you'll be
.