Sanyo SCP-3100 User Manual page 130

SCP3100NZ060529qxd
Setting the Speakerphone for Push 2 Talk Calls
You can set the speakerphone on or off when Push 2 Talk call is
activated. By default, the speakerphone is set to on.
To set the speakerphone on or off:
Select
Note:
If the phone's ringer volume is set to Vibrate, Ringer off, or Silence All, the
speakerphone turns off. Press
Setting the Default View of the Push 2 Talk List
You can select the default Push 2 Talk List when Push 2 Talk is
launched.
To select the default view of the Push 2 Talk List:
1.
Select
(The available lists appear. )
2.
Select your desired list and press
Setting the Floor Display of the Push 2 Talk Calls
To select the floor display:
1.
Select
2. Select Text Only or Text & Image.
To see a display preview of the image, press Preview (right
softkey).
124
06.5.29 1:28 PM
> Settings > Push 2 Talk > Speakerphone > On or Off.
to turn the speakerphone mode on.
> Settings > Push 2 Talk > Default View.
> Settings > Push 2 Talk > Floor Display.
Page 124
.
12. Push 2 Talk