Managing Push 2 Talk Settings - Sanyo SCP-8400 User Manual

Managing Push 2 Talk Settings

Assigning Speed Dialing for Push 2 Talk Entries
To assign Speed Dialing for Push 2 Talk entries:
1.
Select
2.
Select an unassigned number and press
When you select an assigned number and press
be asked whether you want to overwrite the assigned
number. Select Yes or No, or you can also select Reset to
cancel the stored speed dial entry.
3. Press Go to (left softkey), select the list in which you want to
assign a speed dial (Personal List or Personal Grps.) and press
4.
Select the contact and press
– or –
Select the group, select an option, and press
Assign to assign the selected group as a speed dial.
Details to display the group details. You can select the group
member from the group list.
To use Speed Dial for a Push 2 Talk entry:
From standby mode, press the appropriate speed dial key and
press
Restarting the Push 2 Talk Service
To restart the Push 2 Talk service:
Select
Setting Push 2 Talk Guard
This feature enables you to display the warning message when you
cannot receive Push 2 Talk calls. The warning message will appear
when you are launching Media Player, a Web or Java application, or
sending or uploading your pictures.
To set the Push 2 Talk Guard:
1.
Select
(A message will appear.)
2. Press OK (left softkey) to continue.
3. Select On to activate Push 2 Talk Guard. (Select Off to deactivate
this feature.)
12. Push 2 Talk
> Contacts > Speed Dial #s.
.
> Settings > Push 2 Talk > Restart.
> Settings > Push 2 Talk > P2T Guard.
.
.
, you'll
.
.
137