3
Click Properties and click Ports.
4
Adjust the settings, as needed.
E I N S T A L L T H E P R I N T E R D R I V E R
R
on reinstalling the printer driver.
Scanner Problems
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
NOTE:
If you need technical assistance for your scanner, contact the scanner's
manufacturer.
H E C K T H E S C A N N E R D O C U M E N T A T I O N
C
and troubleshooting information.
N L O C K T H E S C A N N E R
U
locking tab or button).
E S T A R T T H E C O M P U T E R A N D T R Y T H E S C A N N E R A G A I N
R
H E C K T H E C A B L E C O N N E C T I O N S
C
• See the scanner documentation for information on cable connections.
• Ensure that the scanner cables are securely connected to the scanner and the
computer.
E R I F Y T H A T T H E S C A N N E R I S R E C O G N I Z E D B Y
V
Windows XP:
1
Click Start→ Control Panel→ Printers and Other Hardware→ Scanners and
Cameras.
2
If your scanner is listed, Windows recognizes the scanner.
Windows Vista:
Start
1
Click
2
If the scanner is listed, Windows recognizes the scanner.
E I N S T A L L T H E S C A N N E R D R I V E R
R
instructions.
— See the printer documentation for information
— Ensure that your scanner is unlocked (if the scanner has a
—
→ Control Panel→ Hardware and Sound→ Scanners and Cameras.
— See the scanner documentation for
— See the scanner documentation for setup
I C R O S O F T
M
Troubleshooting
I N D O W S
W
—
29