Changing Shooting Function Settings - Canon PowerShot SX150 IS Getting Started

Changing Shooting Function Settings

If you change the date or time in the
time and date will automatically change.
Changing the Displayed Units
You can change the units that display in the MF indicator (p. 86) and zoom
bar (p. 23) from m/cm to ft/in.
Changing Shooting Function Settings
If you set the mode dial to G, you can change the settings in the 4 tab
(p. 43).
Before attempting to shoot using a function explained in this section in
modes other than G, check if the function is available in those modes
(pp. 182 – 185).
Switching the Focus Setting
The camera focuses on whatever it is aimed at even when you do not press
the shutter button. However, you can set it so that the camera only focuses
when the shutter button is pressed halfway.
156
setting (p. 19), your [
Choose [Distance Units], then press the
qr buttons to choose [ft/in].
Choose [Continuous AF], then press the
qr buttons to choose [Off].
Since the camera focuses continuously
until you press the shutter button
On
halfway, it allows you to shoot without
missing photo opportunities.
The camera does not focus continuously,
Off
thereby conserving battery power.
Home]