Site Preparation; Ap-650 Package Contents; External Antenna Model Package Contents; Integrated Antenna Model Package Contents - Motorola AP-650 Series Installation Manual

2
AP-650 Series Thin Access Point: Installation Guide

1.3 Site Preparation

Consult your site survey and network analysis reports to determine specific equipment
•
placement, power drops, and so on.
Assign installation responsibility to the appropriate personnel.
•
Identify and document where all installed components are located.
•
Ensure adequate, dust-free ventilation to all installed equipment.
•
Identify and prepare Ethernet and console port connections.
•
Verify that cable lengths are within the maximum allowable distances for optimal signal
•
transmission.

1.4 AP-650 Package Contents

The AP-650 model Thin Access Point comes in four configurations, two Integrated Antenna models
and two External Antenna models. The contents of the package differ between the Integrated
Antenna model and the External Antenna model.

1.4.1 External Antenna Model Package Contents

AP-650 Thin Access Point with external antenna connectors (Plenum Rated)
•
Two wall mount screws
•
Two wall anchors
•
Light pipe
•
Badge for light pipe
•
AP-650 Installation Guide (This Guide)
•

1.4.2 Integrated Antenna Model Package Contents

AP-650 Thin Access Point with integrated antennas
•
Two wall mount screws
•
Two wall anchors
•
AP-650 Installation Guide (This Guide)
•