Site Preparation; Ap6532 Package Contents; External Antenna Model Package Contents; Integrated Antenna Model Package Contents - Motorola AP6532 Series Installation Manual

2
AP6532 Series Access Point: Installation Guide
• Verify there is adequate ventilation around the device, and that ambient temperatures meet
equipment operation specifications.

1.3 Site Preparation

• Consult your site survey and network analysis reports to determine specific equipment
placement, power drops, and so on.
• Assign installation responsibility to the appropriate personnel.
• Identify and document where all installed components are located.
• Ensure adequate, dust-free ventilation to all installed equipment.
• Identify and prepare Ethernet and console port connections.
• Verify that cable lengths are within the maximum allowable distances for optimal signal
transmission.

1.4 AP6532 Package Contents

The AP6532 Access Point is available in integrated antenna and external antenna models. The
contents of the package differ between the integrated antenna and external antenna model.

1.4.1 External Antenna Model Package Contents

• AP6532 Access Point with external antenna connectors (Plenum Rated)
• Two wall mount screws
• Two wall anchors
• Light pipe
• Badge for light pipe
• AP6532 Installation Guide (This Guide)

1.4.2 Integrated Antenna Model Package Contents

• AP6532 Access Point with integrated antennas
• Two wall mount screws
• Two wall anchors
• AP6532 Installation Guide (This Guide)