Dodge Charger 2012 User Manual page 64

ELECTRONICS
Voice Command Tips (8.4 and 8.4N ONLY)
• Using complete names (i.e; Call John Doe vs. Call John) will result in greater system accuracy.
• You can "chain" commands together for faster results. Say "Call John Doe, mobile", for
example.
• If you are listening to available voice command options, you do not have to listen to the
entire list. When you hear the command that you need, press the
steering wheel, wait for the beep and say your command.
Changing The Volume
• Start a dialogue by pressing the Phone button
"Help."
• Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level
while the Uconnect® system is speaking. Please note the volume setting for Uconnect®
is different than the audio system.
NOTE:
To access help, press the Uconnect® Phone
"help." Touch the display or push either
the help session.
Voice Text Reply
• Uconnect® Phone can read or send new text messages on your mobile phone.
• Your mobile phone must support Voice Text Reply over Bluetooth® in order to use this
feature. If the Uconnect® Phone determines your phone is not compatible with Voice Text
Reply messaging over Bluetooth® the "Messaging" button will be greyed out and the
feature will not be available for use.
NOTE:
• For mobile phone compatibility and pairing instructions, please visit
www.UconnectPhone.com
• Uconnect® Phone Voice Text Reply is only available when the vehicle is not moving.
• Any voice commanded system should be used only in safe driving conditions follow-
ing applicable laws regarding phone use. Your attention should be focused on safely
operating the vehicle. Failure to do so may result in a collision causing you and others
to be severely injured or killed.
• In an emergency, to use Uconnect® Phone, your mobile phone must be:
• turned on,
• paired to Uconnect® Phone,
• and have network coverage.
62
, then say a command for example -
button on the steering wheel and say
or button and say "cancel" to cancel
WARNING!
button on the