Table of Contents
Advertisement
2.3
Network setup
After the network connection is built, the next step is setup the router with proper network
parameters, so it can work properly in your network environment. Before you connect to the
router and start configuration procedures, your computer must be able to get an IP address
from the router automatically (use dynamic IP address). If it's set to use static IP address, or
you're unsure, please follow the below instructions to configure your computer with dynamic
IP address:
If the operating system of your computer is....
Windows 2000
Windows XP
Windows Vista/Win7
2.3.1
Windows 2000
Click "Start" button (it should be located at lower-left corner of your computer), then click
control panel. Double-click Network and Dial-up Connections icon, double click Local Area
Connection, and Local Area Connection Properties window will appear. Select "Internet
Protocol (TCP/IP)", then click "Properties".
http://www.sapido.com.tw/
- please go to section 2.3.1
- please go to section 2.3.2
- please go to section 2.3.3
User Manual v1.0.0
Advertisement
Table of Contents
