Wan Type Auto Detection - Sapido BRC70x User Manual

Item
IPSec Pass-through
PPTP Pass-through
L2TP Pass-through
IPV6 Pass-through

5.6.11 Wan Type Auto Detection

http://www.sapido.com.tw/
Description
Internet Protocol Security (IPSec) is a suite of protocols used to
implement secure exchange of packets at the IP layer. To allow
IPSec tunnels to pass through the router, IPSec Pass-through is
enabled by default. To disable IPSec Pass-through , select Disable
Point-to-Point Tunneling Protocol is the method used to enable
VPN sessions to a Windows NT 4.0 or 2000 server. To allow PPTP
tunnels to pass through the router, PPTP Pass-through is enabled
by default. To disable PPTP Pass-through, select Disable.
To allow the L2TP network traffic to be forwarded to its destination
without the network address translation tasks.
Allow IPV6 packet to be forwarded to its destination without the
network address translation tasks.
User Manual v1.0.0