Brewing Better With Pods; More Beverages; Energy Saving Functions; Pod Drawer - Bunn SINGLE SERVE POD BREWER Use & Care Manual

The My Café Single Serve Pod Brewer precisely controls brewing temperature and
®
time to extract superior flavor from your favorite coffee and tea pods. Pods typically
range in weight from 6 to 12 grams or more, so experiment with different amounts of
water and a variety of pod weights to create your perfect cup.
• Start with your favorite pod and 8 ounces of water.
• For a bolder cup, use less water or a heavier pod.
• For a weaker cup, use more water or a lighter pod (it contains less coffee) with the same
amount of water.
:
note Too much water and too little coffee can lead to over-extraction of the grounds
and a bitter taste.
• Use the Pulse Button to steep tea pods or for bolder coffee flavor.
• Use My Café to dispense hot water for hot cocoa and other beverages. Just leave the pod
or tea bag out of the Pod Drawer and press Brew. Use caution, the dispensed water will be
approximately 200°F.
• Brew iced coffee and tea by brewing over a cup filled with ice (make sure cup is resistant
to both hot and cold). After brewing, add milk and/or your favorite sweetener.

ENERGY SAVING FUNCTIONS

• After 6 hours idle, the temperature inside the stainless steel hot water tank drops to 140°F.
It takes about 1 minute to get back to an optimal brewing temperature of about 200°F.
• After 26 hours idle, My Café enters sleep mode. It takes about 2 minutes to return to
optimal brewing temperature (about 200°F).
• When Pod Drawer is removed or inserted, or if any button is pushed, the brewer exits
energy saver/sleep mode and begins to heat up to optimal brewing temperature. When
the indicator light is green, your brewer is ready to use.
BREWING BETTER
WITH PODS
For more information on pods, visit mycafe.com

MORE BEVERAGES

5