Lcd Frame Cover, Lcd Panel - Canon PowerShot G3 Service Manual

CHAPTER 3. REPAIR INSTRUCTION
NUT PLATE
(1)-2
(2)-1
(1)-3
BASE PIN

2.3.2.2 LCD FRAME COVER, LCD PANEL

(1) LCD FRAME COVER
1. Remove the two screws of q.
2. Remove the NUT PLATE.
3. Remove the LCD FRAME COVER from the LCD PANEL.
(2) LCD PANEL
1. Remove the flexible board of the LCD PANEL.
2. Remove the four dowels, then remove the LCD PANEL.
NOTE (Assembling)
In the case of the repair service part, it is supplied with the protection sheet. Remove the protection sheet
before use.
q
(1)-1
Dowels
LCD FRAME
COVER
Fig. 3-24 LCD FRAME COVER, LCD PANEL
LCD PANEL
NOTE (Assembling)
In the case of the repair
service part, it is supplied
with the protection sheet.
Remove the protection
sheet before use.
(2)-2
Dowels
3-24
BACK LIGHT UNIT
q
XA4-9170-359
3.5mm
BLACK
M1.7
(SELF TAP)