Canon PowerShot G3 Service Manual page 121

4 When the message on the right appears, go to 5.
5 1. Remove the ND-4 Filter.
2. Attach the two W-10 Filters between the Lens
and the Color Viewer.
Place the camera so that the lens is set against
the center part of the Color Viewer.
3. Click the "ADJUST" button.
6 When the message on the right appears, go to 7.
7 1. Remove the W-10 Filter.
2. Attach the C-12 and FL-W Filters between the
Lens and the Color Viewer.
Place the camera so that the lens is set against
the center part of the Color Viewer.
3. Click the "ADJUST" button.
CHAPTER 3. REPAIR INSTRUCTION
Color Viewer
Personal
Computer
C-12 Filter FL-W Filter
Color Viewer
Personal
Computer
3-49
W-10
Filter
CAMERA
BODY
Power
Source
Stand
CAMERA
BODY
Power
Source
Stand