Remote Start Error - Python 5706P Owner's Manual

Remote Start Error

For user safety, the system must be properly configured or remote start
will not activate. Refer to the table below for the screens and parking
light flashes that will identify the configuration issue and resolution.
Flashes * Possible Fault
5 Brake on
6 Hood open
7 After performing Remote Start
command - MTS not enabled
After performing Timer Start or
Smart Start command
8 Toggle Switch off
None Alarm is triggered
* Refers to the number of parking light flashes.
© 2012 Directed. All rights reserved.
Solution
Release foot brake
Close hood
Enable MTS mode
Check all Solutions
Turn switch on
Disarm or reset alarm
39 39