Emotiva XPA-1 GEN 2 User Manual page 16

XPA-1
Connecting the Trigger Input and Trigger Output
The Trigger Input accepts a 12 VDC (nominal) trigger signal from another device via a standard
1/8" mono plug. When the trigger is asserted, the XPA-1 will switch On; when the trigger is
removed, the XPA-1 will return to Standby mode. The Trigger Output sends out
12 VDC whenever the main power to the XPA-1 is On (and NOT when it is in Standby mode) which
can be used to switch on other units with trigger capabilities.
Page 12