Diagnostics; Diagnostics Program Download; Navigating Through The Diagnostics Programs; Running Diagnostics Tests - IBM 2292 Hardware Maintenance Manual

Diagnostics

The Diagnostics program uses a full range of diagnostic utilities to determine the
operating condition of the computer's hardware components.
For a complete list of error codes and messages, see Chapter 7, "Symptom-to-FRU
index," on page 47.
Note: The fans in this system may turn off under normal operation. This is a
noise-level reduction feature, and should not be taken to mean there is something
wrong with the system.

Diagnostics program download

To download the Diagnostics program, do the following:
v Go to http://www.ibm.com/.
v Select Support.
v Select Personal computing from the "Get product support for" pull-down menu.
v Search for the machine type in the "Quick Path" box on the left.
v Select Downloadable files from the options on the left.
v Select Diagnostics from the pull down menu.

Navigating through the diagnostics programs

Use the cursor movement keys to navigate within the menus.
v The Enter key is used to select a menu item.
v The Esc key is used to back up to the previous menu.
v For online help select F1.

Running diagnostics tests

There are four ways to run the diagnostic tests.
1. Using the cursor movement keys, highlight Run Normal Test or Run Quick
2. Press F5 to automatically run all selected tests in all categories. See "Test
3. From within a test category, press Ctrl-Enter to automatically run only the
4. Using the cursor movement keys, highlight a single test within a test category,
Press Esc at any time to stop the testing process.
Test results, (N/A, PASSED, FAILED, ABORTED), are displayed in the field beside
the test description and in the test log. See "Viewing the test log" on page 20.

Test selection

To select one or more tests, use the following procedure.
1. Open the corresponding test category.
2. Using the cursor movement keys, highlight the desired test.
16
Hardware Maintenance Manual Types 2292, 2273, 6043, 6343, 6349, 6350, 6790, 6791, 6792, 6793, 6794, 6795, 6823, 6825
Test from the Diagnostics menu and then press Enter.
This will automatically run a pre-defined group of tests from each test category.
Run Normal Test runs a more extensive set of tests than does Run Quick Test
and takes longer to execute.
Selection".
selected tests in that category. See "Test Selection".
then press Enter. This will run only that test.