Managing The Storage Complex - IBM System storage DS6000 Series Redbook
Copy services with ibm system z
Hide thumbs
Also See for System storage DS6000 Series:
- Redbooks (406 pages) ,
- Attachment manual (298 pages) ,
- Introduction and planning manual (119 pages)
Table of Contents
Advertisement
Figure 3-3 FlashCopy help Main page
3.5 Managing the Storage Complex
When you install the DS Storage Manager software on a PC, a Storage Complex is
automatically created. You can then add up to two DS6000s to the Storage Complex. Each
DS6000 is a Storage Unit. Because an SMC can manage two DS6000s, a single Storage
Complex could consist of one SMC and two DS6000s. Figure 3-4 shows how we connected
to the Storage Complex managed by the SMC at the 10.0.0.1 IP address.
Figure 3-4 A single Storage Complex with a single Storage Unit
This complex consists of one Storage Unit, as indicated by the arrow.
A simple scenario might involve two sites. At the production site, there is a single DS6000
managed by its own SMC. Then, at a remote site a second DS6000 is managed by its own
22
IBM System Storage DS6000 Series: Copy Services with IBM System z
10.0.0.1
Advertisement
Table of Contents
