Carrier 50ZH Series Product Data page 7

Base unit dimensions—50ZH036-048
UNIT
50ZH036
50ZH042
50ZH048
ELECTRICAL
CHARACTERISTICS
208/230-3-60, 460-3-60
208/230-3-60, 460-3-60
208/230-3-60, 460-3-60
REQUIRED CLEARANCE TO COMBUSTIBLE MA TL.
TOP OF UNIT .........................................................................................0
DUCT SIDE OF UNIT.............................................................................0
SIDE OPPOSITE DUCTS ......................................................................0
BOTTOM OF UNIT .................................................................................0
NEC. REQUIRED CLEARANCES.
BETWEEN UNITS, POWER ENTRY SIDE ....................................42.00 [1066.8]
UNIT AND UNGROUNDED SURFACES, POWER ENTRY SIDE .36.00 [914.0]
UNIT AND BLOCK OR CONCRETE WALLS AND OTHER
GROUNDED SURFACES, POWER ENTRY SIDE.........................42.00 [1066.8]
REQUIRED CLEARANCE FOR OPERATION AND SERVICING
CONDENSER . COIL ACCESS SIDE..............................................
POWER ENTRY SIDE....................................................................30.00 [762.0]
(EXCEPT FOR NEC REQUIREMENTS)
UNIT TOP .......................................................................................48.00 [1219.2]
SIDE OPPOSITE DUCTS ..............................................................30.00 [762.0]
LEGEND
NEC – National Electrical Code
NOTES:
1. Clearances must be maintained to prevent recirculation of air from outdoor-
fan discharge, with the exception of the condenser coil (36.00 in [914.0 mm]. A
removable fence or barricade requires no clearance.
2. Dimensions are in inches. Dimensions in [ ] are in millimeters.
UNIT WEIGHT CENTER OF GRAVITY mm (in.)
Lb Kg X
277 126 356 (14.0)
277 126 356 (14.0)
277 126 356 (14.0)
INCHES [mm]
INCHES [mm]
INCHES [mm]
30.00 [762.0]
UNIT HEIGHT
Y Z
483 (19.0) 381 (15.0)
483 (19.0) 381 (15.0)
483 (19.0) 381 (15.0)
(IN.)
30.1
30.1
30.1
7