Roger Beep Confirmation Tone - Cobra microTALK CXT595 Owner's Manual

Mode Functions
Mode Functions
Operation
Ten Call Tone Settings
HI / LO
You can choose between ten different Call Tone Settings to transmit
a call alert.
To change a call tone setting:
Mode/Power
1. Press the Mode/Power button until the
letter "C" and the current call tone number
(01 through 10) is displayed. The current
call tone will sound for three seconds.
Call Tone Setting
2. Press the Channel Up or Channel Down button
to hear the other call tone settings.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
Channel Button
HI / LO
b. Press Talk or Call/Lock button to enter the
new setting and return to Standby mode.
c. Do not press any buttons for 15 seconds to enter
the new setting and return to Standby mode.
VibrAlert and Call Alert
®
Your microTALK
signals by sounding an audible call tone, by
Call Tone On/
Vibrate On
vibrating silently or both.
To change call settings:
1. Press the Mode button until the Call Setting
icon flashes on the display. The current setting
("01" vibrate + ring, "02" ring only) is displayed.
Call Tone On/
2. Press the Channel Up or Channel Down button to
Vibrate Off
change the call setting.
3. Choose one of the following:
a. Press the Mode button to enter the new
setting and proceed to other functions.
b. Press Talk or Call/Lock button to enter the
new setting and return to Standby mode.
c. Do not press any buttons for 15 seconds to enter
the new setting and return to Standby mode.
12
radio can alert you to incoming
®
Introduction

Roger Beep Confirmation Tone

•
Your listener will hear an audible tone when you release the Talk button.
HI / LO
This alerts the other party that you are finished talking and it is OK for
them to speak.
Mode/Power
Roger Beep Off
Channel Button Channel Button
HI / LO
Key Tone On/Off
•
HI / LO
When Key Tone is On, an audible tone will sound each time a button
is pressed.
Mode/Power
Channel Button
HI / LO
Operation
Customer Assistance Warranty
To turn roger beep on or off:
1. Press the Mode/Power button until the
Roger Beep icon flashes. The current
on or off setting is displayed.
2. Press the Channel Up or Channel Down button
to select roger beep on or off.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
b. Press Talk or Call/Lock button to enter the
new setting and return to Standby mode.
c. Do not press any buttons for 15 seconds to enter
the new setting and return to Standby mode.
To turn key tone on or off:
1. Current key tone status On/Off will flash.
2. Press the Channel Up or Channel Down button
to select key tone on or off.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
b. Press Talk or Call/Lock button to enter the
new setting and return to Standby mode.
c. Do not press any buttons for 15 seconds to enter
the new setting and return to Standby mode.
Nothing Comes Close to a Cobra
•
•
13
®