"Roger Beep" Confirmation Tone - Cobra MicroTalk MT 615 Manual

MODE FUNCTIONS OPERATION
Set Call Tones
You can choose between five (5) different call tones to transmit a unique call alert.
To Change a Call Tone Setting:
1. Press the MODE button until the letter "C" is displayed. The current call tone number will be
flashing on the display next to the "C." The current call tone will sound for one (1) second.
2. Press CHANNEL UP or CHANNEL DOWN button to hear the other call tone settings.
3. When you have selected a call tone choose one of the following:
a. Press the MODE button to enter the new setting and proceed to other functions.
b. Press the LOCK button to enter the new setting and return to LISTENING MODE.
NOTE: If no button is pushed for 15 seconds, the call tone setting will be set to the present selection.

"Roger Beep" Confirmation Tone

Your listener will hear an audible tone when you release the TALK button. This
alerts the other party that you have finished talking and that it is OK for them to
speak. This feature can be turned On or Off.
To Turn "Roger Beep" On or Off:
When you turn On your microTALK
will be On.
1. Press and release the MODE button until the "Roger Beep" icon flashes on the display. The current On or Off setting is displayed.
2. Press the CHANNEL UP or CHANNEL DOWN button to select "Roger Beep" On or Off.
3. When your desired Roger Beep Mode setting is displayed, choose one of the following:
a. Press the MODE button to enter the new setting and return to LISTENING MODE.
b. Press the LOCK button to enter the new setting and return to LISTENING MODE.
c. Do not press any buttons for 15 seconds to enter the new setting and return to LISTENING MODE.
The setting you select will be saved when you turn your radio off and on again. When the "Roger Beep" is On, the
"Roger Beep" icon will be displayed.
® radio for the first time, "Roger Beep"
Mode Button
Mode Button Select Roger Beep
English
Select Call Tones
Channel Buttons
Channel Buttons