Connecting The Terminal To A Wireless Network - Honeywell Dolphin 70e Black User Manual

3. Connect the terminal to the workstation via a Dolphin communication peripheral.
4. Follow the appropriate instructions below based on the type of program file you are using for the
installation.
If the File is an Installer (*.exe or setup.exe)
An installer program is one that installs on the workstation and the terminal simultaneously; one process
installs to both devices.
1. On the workstation, double-click the *.exe or setup.exe file. The installation wizard begins.
2. Follow the directions on the workstation screen. The installation process includes transferring the
software to the Dolphin terminal.
Note: If you receive an error indicating the program is designed for a different type of computer, then the file is not
an installer (see below).
If the File is Not an Installer
Some programs cannot be installed on workstation PCs because they are designed exclusively for
Windows Embedded Handheld devices. In these cases, the appropriate files must be stored on the host
workstation and transferred to the terminal via and active ActiveSync or WDMC connection.
1. If no documentation is provided with the software, do one of the following base on your
workstation OS:
a. Open ActiveSync and click Explore.
OR
b. Open Windows Mobile Device Center and click File Management.
2. Navigate to the workstation folder where the program file is saved.
3. Either Copy and Paste or drag the file into the Program Files folder on the Dolphin terminal.
Note: If you want the program to be part of the Autoinstall that occurs after a factory reset or software upgrade,
paste the program file(s) in both the
\Honeywell\Autoinstall
4. On the Dolphin terminal, open File Explorer. Navigate to the folder where you saved the program
file.
5. Touch the program file to start the installation.
Note: If you copied the file to the
to install the program. For more information, see

Connecting the Terminal to a Wireless Network

You connect the terminal to a wireless network through the on-board radio (802.11a/b/g/n, Bluetooth,
and/or GSM/CDMA). Each radio has its own configuration utility and requires specific information about
the wireless network to connect. Successful connection depends on your network infrastructure about
which you will need specific information from your network administrator.
7 - 12
\IPSM\Honeywell\Autoinstall
.
\Honeywell\Autoinstall
Hardware Maintenance
folder and the
folder, you can perform a Soft Reset
on page 3-17.