Table of Contents
Advertisement
Standard drive track deflection:
30.0–35.0 mm (1.18–1.38 in)
3.
If the deflection is incorrect, adjust the
drive track.
Adjusting the drive track
1.
Loosen the rear axle nut.
1. Rear axle nut
2.
Lift the rear of the snowmobile onto a suit-
able stand to raise the drive track off the
ground.
3.
Start the engine and rotate the drive track
one or two turns. Stop the engine.
4.
Check the drive track alignment with the
slide runners. If the alignment is incorrect,
loosen the locknut on the left and the right
sides of the snowmobile, then align the
drive track by turning the adjusting bolt on
each side.
1. Slide runner
Periodic maintenance and adjustment
1
1
Drive track
Shifted to
alignment
Left adjusting
Turn out
bolt
Right adjust-
ing bolt
1
3
1. Left adjusting bolt
2. Right adjusting bolt
3. Locknut
Shifted to right
1. Forward
2. Gap
3. Slide runner
4. Drive track
5. Slide metal
Shifted to left
right
Turn in
Turn in
Turn out
3
2
65
Hide quick links:
Advertisement
Table of Contents
