Table of Contents
Advertisement
Periodic maintenance and adjustment
1. Quick fastener screw
2. Top cover
5.
Lift up the rear of the top cover, discon-
nect the main switch coupler, and then
remove the cover.
1. Top cover
2. Main switch coupler
To install the top cover
1.
Connect the main switch coupler.
2.
Place the top cover in the original posi-
tion, making sure to fit the projections on
the cover into the slots in the headlight
unit.
44
1
1. Top cover
3.
Tighten the quick fastener screws.
4.
Pass the brake hose, throttle cable, park-
ing brake cable and wire harness through
the cable guide, place the cable guide in
the original position, and then install the
1
screws.
2
1. Cable guide
5.
Connect the auxiliary DC jack coupler.
6.
Install the left side cover and the shroud.
ECS00372
NOTICE
Make sure that all cables, hoses and
G
leads are routed properly before install-
ing the shroud and covers.
When installing the shroud and covers,
G
be sure to tighten the fasteners secure-
ly.
1
Hide quick links:
Advertisement
Table of Contents
