Yamaha Vector RS90LTGTZ Owner's Manual page 18

Control functions
Odometer and tripmeter modes
E LO
1. Odometer/tripmeter/fuel reserve tripmeter
Push the "SELECT" button to switch the dis-
play between the odometer mode "ODO" and
the tripmeter modes "TRIP A" and "TRIP B" in
the following order:
ODO → TRIP A → TRIP B → ODO
If the fuel level warning indicator and warning
light come on (see page 14), the odometer
display will automatically change to the fuel
reserve tripmeter mode "F-TRIP" and start
counting the distance traveled from that point.
In that case, push the "SELECT" button to
switch the display between the various trip-
meter and odometer modes in the following
order:
F-TRIP → ODO → TRIP A → TRIP B → F-
TRIP
To reset a tripmeter, select it by pushing the
"SELECT" button, and then push the "RE-
SET" button for at least 1 second. If you do not
reset the fuel reserve tripmeter manually, it
will reset itself automatically, and the display
will return to the prior mode after the snowmo-
bile has been refueled and traveled 5 km (3
mi).
Oil change tripmeter
When the periodic oil change interval is
reached at the initial 800 km (500 mi), then at
every 4000 km (2500 mi) thereafter, the oil
change tripmeter and "OIL" flash alternately in
the odometer display, and the tripmeter starts
12
counting the distance traveled from that point.
When this occurs, change the engine oil as
soon as possible. (See page 50 for the oil
change procedure.)
1
TIP
The oil change tripmeter will flash only
G
when the snowmobile is stopped.
To return to the previous display mode,
G
push the "SELECT" button. To display the
oil change tripmeter again, turn the main
switch to the off position, then back to the
on position.
After changing the engine oil, reset the oil
change tripmeter as follows.
To reset the oil change tripmeter
1. Push the "RESET" button for approxi-
mately 1 second while the oil change trip-
meter and "OIL" are flashing alternately in
the odometer display. The distance trav-
eled since the last oil change and "OIL"
will flash alternately in the odometer dis-
play.
2. Push the "RESET" button for approxi-
mately 3 seconds. "00000" and "OIL" will
flash alternately in the odometer display 3
times, and then the display will return to
the previous display mode.
If the engine oil is changed before the oil
change tripmeter appears in the display (i.e.,
before the periodic oil change interval has
E LO