Samsung HT-Q70 Instruction Manual page 20

HDMI Function
Resolution Selection
•
This function allows the user to select screen resolution for HDMI output.
In Stop mode, press and hold the SD/HD (Standard
Definition/High Definition)button on the remote control.
•
Resolutions available for the HDMI output are 480P, 720P and 1080i.
•
SD(Standard Definition) resolution is 480p and HD(High Definition) reso-
lution is 720p/1080i.
Example:If the TV supports resolution up to 480p:
Press the SD/HD button.
•
A 480p video signal is output through the HDMI output.
•
If the TV does not support the configured resolution, you will not be able
to see the picture properly.
Note
•
You do not have to make separate adjustments, since the Home
Theater and TV will be automatically adjust themselves to the opti-
mal resolution and aspect ratio if connected to HDMI. (If the TV is
an HDTV and has an HDMI Input jack, output is automatically con-
verted to 1080i resolution (if supported by the TV).)
•
For component video output, only 480P is supported.
•
When both HDMI and COMPONENT jacks are connected, COMPO-
NENT video is not displayed.
•
See your TV owner's manual for more information on how to select
the TV's Video Input source.
19