Service And Adjustments; Figure - Ariens Mini-Zoom 915061-1434 Owner's/Operator's Manual

Interval Task
Check
Battery
Lubricate
Unit
25 Hours
or Every
Season
Check
50 Hours
Fasteners
or Every
Season
Check All
Belts
100 Hours
or Every
Season
WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
TIPPING SEAT FORWARD
Put steering levers up, remove locknut (on
model 915316) and tip seat forward

(figure 8).

NOTE: Model 915316 must use the locknut to
secure the seat to the unit.
Keep battery and battery terminals clean (see Cleaning Battery
and Battery Cables on page 19).
Apply grease to zerk (1) on
each front wheel
Check mower blade mounting hardware and all other fasteners.
Replace fasteners that are missing or damaged. Tighten all nuts
and bolts to the correct torque value.
Replace worn or deteriorated belts.
• Check hydrostatic belt (see REPLACING HYDROSTATIC
BELT on page 22 for hydrostatic belt location).
• Check PTO belt (see REPLACING PTO BELT on page 21
for PTO belt location).

SERVICE AND ADJUSTMENTS

Action
1
1. Steering Levers
2. Seat Tipped Forward
SEAT ADJUSTMENT
1. Tip the seat forward.
2. Loosen mounting hardware and slide
seat forward or backward to desired
position. Tighten mounting hardware
(figure 9).
GB - 14
2
1
Figure 8