Table of Contents
Advertisement
Caring for the CD-RW / DVD-ROM Combination Drive
To protect your CD-RW/DVD-ROM Combination Drive during operation,
observe the following precautions:
v Do not move the drive when it is in use. Doing so might cause data error or
might damage the drive or discs.
v Avoid exposing the drive to the following conditions:
– High humidity
– High temperature
– Excessive dust
– Mechanical vibration
– Sudden shock or dropping
– Placement on an inclined surface
– Direct sunlight
– Sudden temperature changes
v Do not insert foreign objects into the drive.
v Do not stack objects on the drive.
v Do not remove the drive cover or attempt to service the drive.
v Remove any discs from the disc drawer and make sure that the drawer is
closed before moving the drive unit.
v Keep the original packing materials. If you need to ship the drive unit to a
different location, use the original packing materials to ensure that the drive
is transported safely.
Manually ejecting a disc
If a drive becomes defective and will not allow the disc to eject, turn off the
computer, and straighten a large paper clip to form a tool. The straightened
end must extend at least 45 mm (1.8 in.). Insert the extended end into the
emergency eject hole on the front of the drive (see "Front view of the drive" on
page 1-3). Push the paper clip until the tray opens. Gently pull out the tray
until you can remove the disc.
Formatting CDs
You must format a blank CD-RW disc using DLA before you can drag and
drop files to the disc.
To format a CD-RW disc
1. Insert a blank disc.
2. Double-click My computer
1. Some CDs, such as multi-session CDs, do not require formatting. For more information, see the
Veritas software online user's guide.
1-12
IBM 8x4x32x8 CD-RW/DVD-ROM Combination Drive: User's Guide
with the DLA program:
1
Advertisement
Table of Contents
