Receive The Service - IBM TIVOLI ADSTAR 5697-VM3 User Manual

vmfview mrd

7.2.2 Receive the Service

Electronic Service
If you are receiving service from ServiceLink (electronic service) see Appendix A, Receiving
Service for VMSES Envelopes , section Receive the Service , in the VM/ESA Service Guide.
Remember to substitute the ppfname and compname used for servicing Tivoli ADSM for VM in
the instructions shown in the Appendix. Then return back to this PD and continue with 7.2.3,
"Apply the Service" on page 31.
vmfrec ppf 5654A09A {ADSM | ADSMSFS}
vmfview receive
30
Tivoli ADSM for VM Program Directory
10
Review the merge message log ($VMFMRD $MSGLOG). If necessary,
correct any problems before going on. For information about handling
specific error messages, see VM/ESA: System Messages and Codes, or use
on-line HELP.
1
Receive the service.
2
Review the receive message log ($VMFREC $MSGLOG). If necessary,
correct any problems before going on. For information about handling
specific error messages, see VM/ESA: System Messages and Codes, or use
on-line HELP.
Use ADSM for installing on minidisks or ADSMSFS
for installing in Shared File System directories.
This command clears the alternate APPLY disk.
Use ADSM for installing on minidisks or ADSMSFS
for installing in Shared File System directories.
This command receives service from your service
tape. All new service is loaded to the DELTA disk.