Table of Contents
Advertisement
4
Move the camera straight and slowly in one of
the four directions to start shooting.
• When the camera detects the panorama direction, the
shooting starts.
• The guide showing the current shooting point is
displayed.
• When the guide showing the shooting point reaches
the end, the shooting ends.
Example of Moving the Camera
• The user, without shifting position, moves the camera,
from end to end of the guide, horizontally or vertically in
an arc.
• If about 15 seconds (in
X
seconds (in
Wide (360°)) pass from the start of
the shooting, and before the guide showing the
shooting point reaches the end, the shooting ends.
B
Notes on Easy Panorama Shooting
• The image area seen in the saved image will be narrower than that seen on the monitor at the
time of shooting.
• When the camera movement speed is too fast, there is a large amount of camera shake or there is
little change in subject such as wall or in the dark, the shooting ends in an error.
• Panorama pictures are not saved when the shooting stops before reaching half of the panorama
range.
• When the shooting reaches more than half of the panorama range but finishes before the end
point, the range that is not shot will be recorded as a gray area.
Using Easy Panorama (Shooting and Playing back)
W
Normal (180°)) or 30
Guide
E3
Advertisement
Table of Contents
