Table of Contents
Advertisement
Scene Mode (Shooting Suited to Scenes)
e Night portrait
• Select Y Hand-held or Z Tripod on the screen that is displayed when e Night
portrait is selected.
• Y Hand-held (default setting): This enables you to shoot with the minimum of camera
shake and noise even when holding the camera by hand.
- For a scene with a dark background, when the shutter-release button is pressed all the
way, pictures are shot continuously. The camera combines these pictures to save a
single picture.
- When shooting at the telephoto zoom position, the camera may not shoot pictures
continuously even if a scene has a dark background.
- Once the shutter-release button is pressed all the way, hold the camera steady without
moving it until a still picture is displayed. After taking a picture, do not turn the camera
off before the monitor switches to the shooting screen.
- If the subject moves while the camera is shooting continuously, the image may be
distorted, overlapped or blurred.
• Z Tripod: Select this mode when the camera is stabilized, such as with a tripod.
- Vibration reduction is not used even if Vibration reduction in the setup menu (A94)
is set to On.
- Press the shutter-release button all the way to shoot a single picture at a slow shutter
speed.
• The flash always fires.
• The camera detects and focuses on a face (A62).
• The skin softening feature makes the skin tones in people's faces appear softer (A46).
• If no faces are detected, the camera focuses on the subject at the center of the frame.
• The digital zoom is not available.
f Party/indoor
• The camera focuses at the center area of the frame.
• As images are easily affected by camera shake, hold the camera steadily. Set Vibration
reduction to Off in the setup menu (A94) when shooting using a tripod to stabilize
the camera.
36
Advertisement
Table of Contents
