Zanussi ZWH7120 User Manual page 15

Delay Start Button
Child Lock Option (
Acoustic Signals Option
The above options must be selected after choosing the
(continues)
wash program with the dial, and before pressing the
Start/Pause (
If after having set the delay start option (and pressed
Start/Pause (
follow the below steps:
set the washing machine to PAUSE by pressing the
Start/Pause (
deselect the Delay start (
press the Start/Pause (
Important!
The selected delay can be changed only after selecting
the washing program again.
The door will lock through out the delay time.
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the Start/Pause
button, after that you need to wait about 2-3 minutes to
release door lock, the Door Lock (
flashing to show the door release is in process, pilot light
switch off when the door can be opened.
The "Child Lock" feature will allow you to lock the controls
)
while the machine is running to prevent tampering.
ACTIVATE "Child Lock" by pressing the "Temperature" (
and "Spin" (
symbol "
To DE-ACTIVE "Child Lock" simply press the "Temperature"
( ) and "Spin" (
padlock symbol in the screen will disappear.
Child Lock will remain activated until you de-activate it, even
if the machine is turned off.
The machine is provided of an acoustic device, which
sounds in the following cases:
when selecting a wash program
when depressing the options buttons
at the end of the cycle
in the event of operating problems
By pressing the "Rinse Hold"and "Quick Wash" buttons
simultaneously for about 3 seconds, the acoustic signal is
deactivated (except for the events of operating problems).
By pressing these 2 buttons again, the acoustic signal is
reactivated.
) button.
) button) and you wish the cancel it,
) button;
) option, changing the status;
) button to start the program.
) buttons about 3 seconds, the padlock
" is displayed on the screen.
) buttons about 3 seconds, the "
) pilot light is
)
"
15