Directed Electronics Viper 5501 Installation Manual page 12

Keyless entry and remote start
Hide thumbs Also See for Viper 5501:
Table of Contents

Advertisement

3.
Double Lock Only: the lock output only will pulse twice
4.
Double Lock & Unlock: the lock & unlock outputs will pulse twice
6. Door Lock Output Duration
1.
0.8sec.: the door lock output pulses will be 800mS in duration
2.
3.5sec.: the door lock pulses will be 3.5 seconds in duration
3.
0.4 sec.: the door lock pulses will be 400mS in duration
7. Ignition Controlled 2nd Unlock
1.
After first unlock: for Ign-controlled unlocking, the 2nd unlock will activate 800mS after the first (driver
door) unlock
2.
With first unlock: for Ign-controlled unlocking, the 2nd unlock will activate at the same time as the first
(driver door) unlock
8. Comfort Closure
1.
No comfort Closure: Comfort Closure is defeated when locking
2.
Comfort Closure 1: the door lock pulse (or 2nd pulse for double pulses) will remain on for 20 sec-
onds.
3.
Comfort Closure 2: 800mS following the end of the door lock pulse (or 2nd pulse for double pulses);
the door lock output will turn on again for 20 seconds.
9. Hood Switch Type
1.
Normally Open: for vehicles with a hood switch that rests at ground when the hood is OPEN
2.
Normally Closed: for vehicles with a hood switch that rests at ground when the hood is CLOSED
10. Door Switch Type
1.
Normally Open: for vehicles with door switches that rest at ground when the door is OPEN
2.
Normally Closed: for vehicles with door switches that rest at ground when the door is CLOSED
11. Remote Button Unlock (Ign off)
1.
On: a message telling the remote control to unlock the keypad is sent each time the vehicle ignition
is turned off
2.
Off: no message is sent
12
© 2009 Directed Electronics. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Python 951Clifford 20.7x

Table of Contents