Tuner Operation - Phase Linear BT1611i Owner's Manual

BT1611i
p[;:::§}~[§
L I N E A R
Repeat for the remaining five presets on the
current band and for all presets on the other
four bands.
Automatically Store / Preset
Scan (AS/PS)
Automatically Store
Select six strong stations and store them in the
current band using the Automatic Store feature.
To enable this feature, press and hold AS/PS
(17) for more than two seconds. The radio will
automatically scan the band in use and enter
strong stations into the preset memory
rQI
0
BT16111 MP3IWMA RECEIVER
\J'SUB
1·1"
~
• I I
1.1
i
11.1
Preset Stations
up to six stations on each band can be stored
as presets and can then be instantly recalled by
pressing the associated preset button on the
front panel (16) or remote control. To store a
station, turn the radio on and select the desired
band and station. Press and hold the desired
preset button (numbered one through six on the
face of the radio or remote control) for more
than two seconds. When stored, the preset
number will appear in the display. The station is
now stored and can be recalled at any time by
pressing the corresponding preset button.
TUNER OPERATION
AM/FM Band Selector (BAND)
Press BAND (5) during radio play to switch
between three FM bands and two AM bands.
"FM1", "FM2", "FM3", "AM1" or "AM2" will
appear in the display to indicate the band
currently selected.
Tuning
Automatic Tuning
Press the Up Tuning
»1
(14) button to tune
upward ir frequency and the Down Tuning
1«
(13) button to tune downward in frequency. The
unit will automatically stop at the next strong
station. If the Local mode is active, the radio will
seek the next strong local station when either
button is pressed.
Manual Tuning
Press the Up Tuning (14) or Down Tuning (13)
button for more than two seconds to select
manual tuning mode. "Manual Seek" will appear
in the display. Press the Up or Down Tuning
buttons to move radio frequency up or down
two digits at a time. Press and hold the Up or
Down Tuning buttons to quickly advance to a
certain frequency. Release when the desired
frequency is reached. If tuning is not adjusted
within five seconds of entering manual tuning
mode, the radio will revert to automatic tuning
and "AUTO" will appear in the display.
11