Mp3 Player Operation (Ump400) - Phase Linear UCD300 Owner's Manual

Am/fm/cd receiver
Table of Contents

Advertisement

UCD300/UMP400
MP3 PLAYER OPERATION (UMP400)
This section applies to the UMP400 only.
Instructions for lnsert/Eject, PlaylPause, Track
Selection, Cue/Review, Scan, Repeat, and
Random are the same for CD and MP3
operation. Please see the CD Player Operation
section for information about these topics.
After inserting an MP3 disc, "MP3 T" and the
track number momentarily appear, followed by
the ID Tag (if supported). After these initial
indications, the track number and song title
alternately appear, with the song title scrolnng
right to left across the display.
Display Information
Press BAND (5 ) to display the 103 tag. if
available, The 10 tag can specify the song title,
artist, album, year and/or comments. If no JO
tag
is available, "-NO 103"
will appear in the
display following the comments.
Direct Song/ File Access
Press the AMS (8) button once to enable direct
track searching. Use the AUDIO control (3) to
select the desired song/file. Press the BAND/
LOUD/ENTER (5) button to play the selected
song/file, or do nothing and the unit
wilt
search
and play the song/file within three seconds.
Searching by Name
1.
Press the AMS button
(8)
twice to enable
directory or file name searching.
2.
Use the AUDIO control (3) to select the
characters A-Z, _, -, +, and 0-9.
3.
Press the SEL button (4) to confirm entry
of each character.
4.
Press the BAND/LOUD/ENTER button (5)
to begin the search. If the selected entry is
a directory name, ' "
'" will be displayed.
5.
Use the AUDIO control to select the song/
file in this directory/folder.
6.
Press BAND/LOUD/ENTER to play the
selected song/file.
13
Searching the Root Directory
1.
Press the AMS button (8) three times.
2.
Use the AUDIO control (3) to select the
desired directory/song.
If a directory is
present, "O-DIR" appears in the display.
3.
Press the BAND/LOUD/ENTER button (5)
to access the directory. ", '"
will
appear
in the display indicating that a directory
has been selected for searching.
4.
Use the AUDIO control
to
select the songl
file.
5.
Press BAND/LOUD/ENTER to play your
selection.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ump400

Table of Contents