Biasi B-3 Manual And Installation Instructions page 2

Dear Customer:
Thank you for buying a B10 Series Boiler from Quincy Hydronic Technology.
The B10 Series Boiler is a cast iron, oil or gas fired hot water boiler, using the famous
BIASI B10 (3-pass) design. The boiler is light, compact, simple, rugged and engineered
for maximum home heating efficiency. The B10 series boiler is Energy Star listed with
AFUE efficiencies up to 87% on oil and 85.5% on direct vent gas.
We realize that it is not possible to answer all questions about the B10 series boiler
system in this manual. Reading this installation manual does not make the reader an
expert in all aspects of installation and operation, and does not replace the need for a
qualified licensed heating contractor. We urge you to contact your installing
contractor ,dealer, or us if you have any question about any aspect of your boiler's
performance. Our main concern is that you are satisfied with the B10 installation and its
performance. We require your contractor complete efficiency tests using appropriate
instruments and record the burner performance on page 29.
The controls and accessories listed in this manual are intended to serve as guidelines
rather than specific recommendations. We realize other makes and models of the
specified devices are available and can be used as successfully as those we specify.
The installing contractor is the best judge of a system's specific requirements, as well as
the local availability of certain makes and models of controls and accessories. The
preceding does not apply, however, to the equipment that comes with every boiler, such
as the overheat control (L4006A, 7248, Hydrostat, or Aquasmart) and pressure relief
valve. The installation of the specific devices supplied with every boiler is
absolutely necessary to the safe operation of the boiler and protection of the
heating system.
All BIASI Boiler blocks are built in accordance with the ASME boiler and pressure
vessel code, and bear the "H" stamp. The entire range of applications for the B10
Series Boiler have been tested to CAN/CGA B149 and are ULC compliant.
This B10 Boiler block has a limited lifetime warranty (refer to back of manual), a copy of
which is provided with the boiler. Please be sure to return the warranty registration card
as the warranty will be void without your boiler's serial number (located on the plate on
the front leg of the boiler), date of installation and the name of your installer.
Thank you for purchasing our B10 Series Boiler. If you have questions or comments,
please don't hesitate to contact us immediately. Our goal is 100% customer satisfaction.
Page 2
Sincerely,
Jim Quincy
President
Quincy Hydronic Technology Inc.