Touch Panel - Sony Cyber-shot DSC-TX9 Instruction Manual

Cannot print images with the date.
• Using "PMB", you can print images with date (page 153).
• The camera does not have a feature for superimposing dates on images. However, because the images
shot with the camera include information on the recording date, you can print images with the date
superimposed if the printer or the software can recognize Exif information. For compatibility with
Exif information, consult the manufacturer of the printer or the software.
• If you use a photo printing service, ask them to superimpose the dates on images.
Cannot print the 3D images as they are displayed on the camera's LCD screen.
• The 3D images displayed on the camera are MPO files, but the images to be printed are JPEG files, so
in some cases, the images to be printed out are not the same as the ones displayed on the LCD screen.

Touch panel

Cannot operate the touch panel buttons correctly or fully.
• Perform [Calibration] (page 137).
• [Housing] is set to [On] (page 128).
The paint pen operation reacts at inappropriate points.
• Perform [Calibration] (page 137).
Others
The lens gets fogged.
• Moisture condensation has occurred. Turn off the camera and leave it for about an hour before using
it.
The camera becomes warm when you use it for a long time.
• This is not a malfunction.
The Clock Set screen appears when you turn on the camera.
• Set the date and time again (page 145).
• The internal rechargeable backup battery has discharged. Insert a charged battery, and set aside for
24 hours or more with the power left off.
The date or time is incorrect.
• The Area Setting is set to a different location than your current location. Change the setting by
t (Settings) t (Clock Settings) t [Area Setting].
170 GB