Menu #2 - Advanced Features - Clifford 10.5X Installation Manual

Car security

Hide thumbs Also See for 10.5X:

Owner's manual (61 pages)

Table Of Contents

Table of Contents

1-8 FORCED PASSIVE ARMING ON/OFF: To use this feature, passive arming must be selected

in menu item 1-1. When turned on, forced passive arming will ensure that the system will passively

arm, even if a zone is left open or invalid. Forced passive arming occurs one hour after the ignition

is turned off.

1-9 AUTOMATIC ENGINE DISABLE (AED) ON/OFF: AED is a full-time, passive starter

disable that works independently of the security system. When turned on, the starter immobilizer

circuit will go active 30 seconds after the ignition is turned off. The LED will flash at half its normal

rate when the ignition is turned off to indicate that AED is active and will interrupt the starter in

30 seconds. AED does not occur in Valet mode and can be bypassed using the emergency override

procedure. The transmitter can also be used to disarm AED.

1-10 VEHICLE RECOVERY SYSTEM: If Vehicle Recovery System (VRS

ON setting, VRS

can be activated by the user. Refer to the Owner's Guide for additional description.

® ®

1-11 CODE-HOPPING™ ON/OFF: The system uses a mathematical formula to change its code

each time the transmitter and receiver communicate. This makes the group of bits or "word" from

the transmitter very long. The longer the word is, the easier it is to block its transmission to the unit.

Disabling the Code-Hopping™ feature lets the receiver ignore the Code-Hopping™ part of the

transmitted word. As a result, the unit may have better range with Code-Hopping™ off.