Samsung Nx2DDD Quick Start Manual page 186

Setting
Camera settings menu >
Item Description
Set power shut off time. The camera shuts off if you do not
use it for the time you set. (30 sec, 1 min*, 3 min, 5 min,
10 min, 30 min)
•
Power Save
The camera retains the power-off time setting even if
you replace the battery.
•
Power Save may not work if the camera is connected to
a computer or a TV or playing a slide show or a movie.
Language
Set a language the camera shows on the display.
Set date, time, date format, time zone and whether to
imprint the date on photos. (Time Zone, Date & Time,
Date Type, Time Type, Imprint)
Date & Time
•
The date appears on the lower right side of the photo.
•
When you print a photo, some printers may not print
the date appropriately.
* Default
Item Description
Set the video signal output appropriate for your country
when connecting the camera to an external video device
such as a monitor or HDTV.
• NTSC: USA, Canada, Japan, Korea, Taiwan, Mexico, etc
Video Out
• PAL (Supports only PAL B, D, G, H, or I): Australia, Austria,
When you connect the camera to an HDTV that supports
Anynet+ (HDMI-CEC), you can control the play function of
the camera with the TV remote control.
Anynet+
• Off: You cannot control the play function of camera with
(HDMI-CEC)
• On*: You can control the play function of camera with the
When you connect the camera to an HDTV with an HDMI
cable, you can change the resolution of the image.
• NTSC: Auto*, 1080p, 720p, 480p,
HDMI Output
Belgium, China, Denmark, Finland, France, Germany,
England, Italy, Kuwait, Malaysia, New Zealand, Singapore,
Spain, Sweden, Switzerland, Thailand, Norway, etc
the TV remote control.
TV remote control.
576p (activates only when PAL is selected)
If the connected HDTV does not support the resolution
you select, the camera sets the resolution one level lower.
* Default
153