Camera Shroud Installation; Bracket Installation - Honeywell HSD-361P Operation Manual

Vista series hsd speed dome

Table of Contents

2.4 Camera Shroud installation

Fig.8 illustrates the location of the 4 screw holes for the camera shroud (M3).

Fig.8

Fig.9

Screw holes

Tighten the screws

Fig.10

Fig.11

2.4.1 Position the open end of the camera shroud towards the camera lens as illustrated on Fig. 9. Align the 4 holes of the

shroud with the 4 holes on the core of the dome as illustrated in Fig. 10.

2.4.2 Utilizing the supplied (4) four M3*14 screws securely tighten the camera shroud in place, as illustrated in Fig. 11.

Feed the

wiring harness through the channel inside the wall bracket as illustrated in Fig 12

Verify that the

2.5.1

BNC

channel remains empty before feeding the wiring harness

Feed the BNC

Wiring from here

4-M6 expand screw

Fig.12

Fig.13

Affix the wall bracket to the wall using 4 M6 Expand screws as illustrated in Fig 13

2.5.2

Table of Contents

Show Quick Links

Table of Contents