Honeywell HSD-361P Operation Manual page 24

AE Control
AE Control
→
1. AE Mode
2. Shutter Speed
3. Iris Level
4. AGC Level
IRIS CLOSE to Exit
AE Control
1. AE Mode
→
2.Shutter Speed
3. Iris Level
4. AGC Level
IRIS CLOSE to Exit
AE Control
1. AE Mode
2. Shutter Speed
→
3. Iris Level
4. AGC Level
IRIS CLOSE to Exit
AE Control
1. AE Mode
2. Shutter Speed
3. Iris Level
→
4. AGC Level
IRIS CLOSE to Exit
Camera Name
Camera Name
→
1. Name
2. Change Name Loc
3. Name Display
IRIS CLOSE to Exit
Camera Name
1. Name
→
2. Change Name Loc
3. Name Display
IRIS CLOSE to Exit
Camera Name
1. Name
2. Change Name Loc
→
3. Name Display
IRIS CLOSE to Exit
20
1. AE Mode
Auto
Steps:
Auto
1) Move the joystick Up or Down to move the cursor to select AE Mode.
Auto
2) Move the joystick Left or Right to setup AE Mode.
Auto
2. Shutter Speed (Manual/ Shutter Speed)
Auto
Steps:
Auto
1) Move the joystick Up or Down to move the cursor to select
Auto
Auto
2) Move the joystick Left or Right to setup Shutter Speed.
3. Iris Level (Manual / Iris Level)
Auto
Steps:
Auto
1) Move the joystick up or Down to move the cursor to select
Auto
Auto
2) Move the joystick Left or Right to setup Iris Level.
4. AGC Level (Manual)
Auto
Steps:
Auto
1) Move the joystick up or Down to move the cursor to select
Auto
Auto
2) Move the joystick Left or Right to setup AGC Level.
1. Name of camera
Steps:
1）Move the joystick Up or Down to move the cursor to select Name.
2）Edit Name (Refer to Chinese Editing Instruction).
Off
3）Move the joystick Left or Right to setup the Name Display.
2. Change Name Position
Steps:
1）Press
2）Move the joystick randomly. The display will be changed auto on
Off
3. Name Display
Off
Shutter Speed.
Iris Level.
AGC Level.
OPEN or move the joystick Left or Right to enter.
the screen.
Step: Move the joystick Left or Right to setup Name Display.