Air Filter Element Change - KYMCO Xciting 250i Owner's Manual

MAINTENANCE
Air cleaner filter element
(Xciting 500i and 500Ri models):
The air cleaner filter element should be serviced at regular
intervals. Service the element more often when riding in un-
usually wet or dusty areas.
1. Open seat (see page 27)
1 1 1 1 1
2. Remove air cleaner cover 1.
2 2 2 2 2
3. Remove the screws and air cleaner case cover 2.
3 3 3 3 3
4. Remove the air cleaner element 3 by pulling it out.
5. Discard the air cleaner element.
6. Install a new air cleaner element. Use the KYMCO genuine
air cleaner element or an equivalent air cleaner element speci-
fied for your scooter.
Using the wrong KYMCO air cleaner element or a non-
KYMCO air cleaner element which is not of equivalent
quality may cause premature engine wear or perfor-
mance problems.
7. Complete the installation by reinstalling the air cleaner parts in
the reverse order of removal.
59