Suspension; Diagnostic Tool Connector - KYMCO Xciting 250i Owner's Manual

CONTROLS & FEATURES

Suspension

Each shock absorber 4 on your scooter has 5 spring preload
adjustment positions for different load or riding conditions.
4 4 4 4 4
Use a pin spanner 5 to adjust the rear shock spring preload.
Position 1 is for light loads and smooth road conditions. Posi-
tions 3 to 5 increase spring preload for a stif fer rear suspen-
sion and can be used when the scooter is heavily loaded.
Be certain to adjust both shock absorbers to the same spring
preload positions.
Standard spring preload position: 3
Always adjust the shock absorber pre-lead position in
sequence (1-2-3-4-5 or 5-4-3-2-1). Attempting to adjust
directly from 1 to 5 or 5 to 1 may damage the shock
absorber.
5 5 5 5 5

Diagnostic tool connector

The diagnostic tool connector 6 is located to the right of the
battery. This connector can be used by a qualified technician
with the appropriate diagnostic tools to evaluate the scooter's
electronic fuel injection and electrical systems.
The diagnostic tool connector should only be accessed
by the service personnel at your authorized KYMCO
dealer.
Improper connection to or use of the diagnostic tool
connector could damage the electronic fuel injection
or electrical systems on your scooter.
6 6 6 6 6
33