Sata Mode; Network Stack; Ipv4 Pxe Support; Ipv6 Pxe Support - Gigabyte GA-J1800N-D2H User Manual

` IDE Configuration
& Serial-ATA (SATA)
Enables or disables the integrated SATA controllers. (Default: Enabled)
& SATA Mode
Allows you to decide whether to configure the SATA controller integrated in the Chipset to AHCI mode. This
item is configurable only when Serial-ATA(SATA) is set to Enabled.
IDE Mode D isables RAID for the SATA controllers and configures the SATA controllers to IDE
mode.
AHCI Mode C onfigures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable
advanced Serial ATA features such as Native Command Queuing and hot plug.
(Default)
& Serial-ATA Port 0/Serial-ATA Port 1
Enables or disables each SATA port. This item is configurable only when Serial-ATA (SATA) is enabled.
The area below displays the current status of each SATA port.
& SATA Port0 HotPlug/SATA Port1 HotPlug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
` Network Stack Configuration
& Network Stack
Disables or enables booting from the network to install a GPT format OS, such as installing the OS from
the Windows Deployment Services server. (Default: Disabled)
& Ipv4 PXE Support
Enables or disables IPv4 PXE Support. This item is configurable only when Network Stack is enabled.
& Ipv6 PXE Support
Enables or disables IPv6 PXE Support. This item is configurable only when Network Stack is enabled.
` CSM Configuration
& CSM Support
Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process.
Enables UEFI CSM. (Default)
Enabled
Disables UEFI CSM and supports UEFI BIOS boot process only.
Disabled
& Boot option filter
Allows you to select which type of operating system to boot.
UEFI and Legacy Allows booting from operating systems that support legacy option ROM or UEFI
option ROM. (Default)
Legacy only Allows booting from operating systems that only support legacy option ROM.
UEFI only Allows booting from operating systems that only support UEFI option ROM.
This item is configurable only when CSM Support is set to Enabled.
& Network
Allows you to select whether to enable the UEFI or legacy option ROM for the LAN controller.
Do not launch Disables option ROM. (Default)
UEFI only Enables UEFI option ROM only.
Legacy only Enables legacy option ROM only.
Enables legacy option ROM first.
Legacy First
UEFI First Enables UEFI option ROM first.
This item is configurable only when CSM Support is set to Enabled.
- 21 -