Advanced - Gigabyte GA-J1800N-D2H User Manual

2-3

Advanced

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main Advanced
Power Loading
` Hardware Monitor
` Intel(R) Smart Connect Technology
` SIO Misc Functions
` CPU Configuration
` PPM Configuration
` Thermal Configuration
` IDE Configuration
` Network Stack Configuration
` CSM Configuration
` USB Configuration
` Realtek PCIe GBE Family Controller (MAC:74:D4:35:1D:21:FF)
` SIO Configuration
& Power Loading k
Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing
it to shutdown or fail. If this occurs, please set to Enabled. Auto lets the BIOS automatically configure this
setting. (Default: Auto)
` H/W Monitor
& CPU Temperature (DTS)/System Temperature
Displays current CPU/system temperature.
& CPU/System Fan Speed
Displays current CPU/system fan speed.
& Vcore/VCC3/+12V/VCC/CPU_VAXG/3VDUAL/DDR1_35VIO
Displays the current system voltages.
` Intel(R) Smart Connect Technology
& ISCT Support
Enables or disables Intel
®
` SIO Misc Functions
& ErP
Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)
Note: When this item is set to Enabled, the following functions will become unavailable: PME event wake
up, power on by mouse, power on by keyboard, and wake on LAN.
& Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Open", otherwise it will show "Close."
To clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings
to the CMOS, and then restart your system.
k Only for GA-J1900N-D2H.
Chipset Security Boot Save & Exit
[Auto]
k
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Smart Connect Technology. (Default: Disabled)
- 19 -
gf: Select Screen
hi: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit